Epsxe Full Screen Not Centered

Epsxe Full Screen Not Centered

DOWNLOAD ->>->>->> https://tinurll.com/2sXtut

Hello guys!I have a problem with my ePSXe 2.0.5. I cannot open games as a centered fullscreen. It cuts the image. I have tried a lot with changing settings and got no more ideas...Have a look on my attached screenshots.Regards

If you continue to have trouble playing your game in full screen mode, switch to windowed mode. Under the main menu of the game, select Options, and un-check Full Screen mode.

Well... I have tried several combinations offullscreen=truefulldouble=falsefullresolution=originalwindowresolution=originalwith output= surface, overlay and ddrawalso with aspect=true and scaler=normal2x

with this config dosbox's DOS window (C:>) really does start up in 1280x1024 however once the game starts it downsizes to something much smaller.Sure, by trial and error i found that using any ???3x scaler will make THE GAME WINDOW larger but what's the point of specifying resolutions for window and fullscreen if it only applies to black _dos_ window?and what do i do if i want to rescale game's native 320x200 to something like 1600x1200?? there is no 5X scaler

I have been investigating this, and it seems that you were right after all: With no Dosbox.conf file, dosbox will display 640x400 but with incorrect refresh rate, so the monitor will show no resolution and the screen is off-centered. Trying to fix the refresh rate issue with refreshfix or with reforce utilities will not fix the problem: real dos displays 640x400 70Hz okay, dosbox tries to set 640x400 75hz which results in not recognized video mode,off centered and squished.Only using Powerstrip will allow me to force dosbox into setting 640x400 70Hz correct video mode, also ingame.

Yes, that description of overscan is correct. Devs were instructed not to put important content within the outer ~10-20% of the screen, though the amount of actual overscan area varied from set to set. Sometimes this extra area was filled with padding/black and sometimes it had garbage (esp common in older system; NES is full of that crap).

[QUOTE=hunterk;28619]Yes, that description of overscan is correct. Devs were instructed not to put important content within the outer ~10-20% of the screen, though the amount of actual overscan area varied from set to set. Sometimes this extra area was filled with padding/black and sometimes it had garbage (esp common in older system; NES is full of that crap).

Setting your ePSXe window size screen to full screen is one of the ways to improve your PS1 gaming experience. Therefore, if you are using ePSXe, you might be wondering how to change the window size to full screen.

This saving is similar to how you would save data to your physical SD card. Thus, with ePSXe, you do not have to worry about enjoying quality gaming and saving progress, as you can achieve all this with a few mouse clicks. {"@context":"http:\/\/schema.org\/","@type":"BlogPosting","name":"ePSXe Tips (Full screen, Save state, Memory cards, Textures)","url":"https:\/\/technology.purplepedia.com\/emulators\/how-to-change-the-window-size-to-full-screen-on-epsxe\/","articleBody":"Setting your ePSXe window size screen to full screen is one of the ways to improve your PS1 gaming experience. Therefore, if you are using ePSXe, you might be wondering how to change the window size to full screen.\n\n\n\nSo, how do I change the window size to full screen on ePSXe? To change the window size to full screen, click the desktop resolution dropdown and expand it. Depending on your computer, select the recommended manufacturer\u2019s resolution and click the appropriate box.\n\n\n\nThe ePSXe is the PS emulator for iPhone and Windows. It features plugins that increase its sound-producing and video rendering capabilities. To enhance the full-screen setting, you will use visual plugins, and you can download most of these for free. This way, you can achieve the best setting for ePSXe full screen.\n\n\n\nTo change the window size to full screen on ePSXe, you will first download Pete\u2019s plug-in from its website and use WinZip to extract these files and save them in the ePSXe folder, then configure the filter.\n\n\n\nSaving files on the ePSXe ensures easy location by the emulator when you change your filter settings. This process will vary slightly depending on whether you use Windows or iPhone.\n\n\n\nAfter downloading the filter, you will need to configure it. To do this, start your emulator and then click Config then Video. Next, select Pete\u2019s OpenGL Driver and click Configure. While on this window, click the circle next to Full-screen mode and then the arrow of the Desktop resolution for the screen resolution options.\n\n\n\nYou should stick to the manufacturer\u2019s recommendations for the best graphic qualities. Setting a resolution higher or below the recommendations will affect image quality and your overall gaming and performance.\n\n\n\nIf you are using Android, the process will be more or less the same. First, you will run the ePSXe app on your smartphone. Next, select the Settings menu and scroll downwards to the Screen Preferences tab. Select the Screen Orientation and set it to Landscape. Afterward, go back to the Screen Preference and select Screen Ratio, which you will set to WideScreen from its default 4:3.\n\n\n\nThis setting will make your ePSXe to be fullscreen, such that it fits your smartphone screen as you play your PS1 games. The other alternative to fullscreen is Stretch, but it is not advisable, as it will cause your graphics to be blurry.\n\n\n\nTo achieve the above full screen set up on your ePSXe, you need the screen filter plugins and shader. These two plugins work together to ensure quality graphics. They do this by affecting the shape and color of the characters in the game.\n\n\n\nScreen filter plugins enhance 3-D model textures by enabling anti-aliasing and smoothing out the sharp polygon corners that make 3-D characters. When you use them together with shaders, these plugins make the picture colors stronger and blend some of the shades, hiding the common flaws in the classic PS games. You can get the best ePSXe filter by using the Pete OpenGL2 PSX plugin.\n\n\n\nShaders are an important addition to quality full-screen graphics. These plugins improve the image of background graphics and character sprites by creating brighter color shades in 3-D PS games.\n\n\n\nThey include the Eternal SPU plugin and ePSXe SPU core. To enable a shader, click Configure, select Video, select Configure Pete\u2019s PSX OpenGL Renderer, then, next to the Shader Effects, select that checkbox.\n\n\n\nFrom the dropdown menu, you will have various shader effects but for the best settings, choose Shader level 4, then click Yes to select pixel shader. For the best graphics, ensure you balance the plug-in settings to ensure your images are clear even on full screen.\n\n\n\nHow Do You Save State on ePSXe?\n\n\n\nThe Save States feature saves your exact spot in the game. This feature is beneficial as you will not have to replay your progress to get back to where you were in the game. The size of a save state is somewhere between 1 and 3MB, depending on what is in the memory by the time you are saving and the game.\n\n\n\nYou can save state through keyboard shortcuts or manually through the Run menu. To save state on ePSXe, using the keyboard, press F1 to save in the first slot. Alternatively, go to Run, then Save State and select any of the five slots available. These slots are usually reserved to enable you to save up to five states. Once you choose a save slot, ePSXe will return to the game.\n\n\n\nAfter saving your states, you will not need to use the ePSXe menu every time to access them, courtesy of some ePSXe shortcuts that enable easy management. Thus, you will use F1 to save your game to the selected slot, F2 to switch to one slot higher, and F3 to load the game from the selected slot.\n\n\n\nGenerally, the ePSXe save state feature is a bit glitchy since it is an emulator. Its history shows poor workability and instability during heavy activity. Thus, it is advisable to save your state when nothing is going on.\n\n\n\nAlternatively, save your games periodically to avoid losing progress should this emulator crash or freeze. On the other hand, if your game has high in-saving, it will be best to use both in-games and save states to save your progress. This way, you will have a backup if the save state lags in functionality.\n\n\n\nIf you have an old PS game but no longer own a PS console, you do not need to worry as you can check this collection via your ePSXe. With the ePSXe, your computer will function like a PS. It will even allow you to save your games on a virtual memory card. The good thing with virtual memory is that you will not run out of room with it.\n\n\n\nTo check the game save files on your virtual memory card, click the Start button on your PC, Computer, and then Local Disc(C). Next, navigate to Program Files and double-click the ePSXe folder. To view the files you saved in your virtual memory card, click the mem card\u2019s folder. You can also delete a file by right-clicking and selecting Delete.\n\n\n\nAre You Missing Render Texture Extension on ePSXe?\n\n\n\nThe Missing Render Texture Extension issue will result when you initialize the graphics plug-in. It occurs alongside errors like Missing -PBuffer Extension and No Pixel Format available.\n\n\n\nIf you are experiencing the Missing Render Texture Extension issue, switching the rendering mode may fix the problem. To fix it, go to Config, then video. On the Stretching mode, select scale to window size, keep aspect ratio, and on Render mode, select Render to P-Buffer, then copy to texture.\n\n\n\nThe Render mode option is supported by most cards, hence an ideal option. With the above set, click Ok to effect the changes. You can then test the game or Run Bios, and it should work.\n\n\n\nYou can also try general ways to fix the above problem by running ePSXe as an admin, using system restore, and setting CPU overclocking to x1. Running ePSXe as an admin will either solve the problem or give another error of a missing a.dll file. In case of the above missing file, browse online for the file, download, then unzip. After that, place the file in the ePSXe folder for easy access.\n\n\n\nTo restore function through system restore, you will click the Start button, type System Restore on the search box, and then press Enter. This action will open the System Recovery, and you can select another recovery point then click on Next. On the next window, select a restore point. Doing this will return you to the last spot where it worked. You can then click Next and Finish to start the restore process.\n\n\n\nMost players are well-versed in setting the CPU overclocking to x1 and advise each other to do so in most online gaming platforms. To do this, start by locating the ePSXe main file and double click to execute it.\n\n\n\nYou can also search for it from the start tab. When you open the emulator window, click the choices tabs within the menu, navigate to CPU overclocking using your mouse, activate the x1 option, and check whether the matter persists.\n\n\n\nHow Do I Add a Memory Card To ePSXe?\n\n\n\nThe ePSXe features memory card support. There are two cards in the mem cards directory, and each is about 128kb, the size of a standard PSX card. The first file is epsxe000.mcr, and the second is epsxe001.mcr. Read on as I explain how you can add a memory card to ePSXe for a fantastic gaming experience.\n\n\n\nTo add a memory card to ePSXe, double-click the ePSXe icon on your desktop. Click Config, then Memory Cards. To load the memory card file, click on the Select tab. Next, select your memory card from its location on the hard drive and click Open.\n\n\n\nThe ePSXe does not come with a memory card editor. Thus, to edit your Mem cards, you can use the Load and Run BIOS to access the PSX memory card editor, and from here, you can delete or move games you do not want to keep.\n\n\n\nAlso, if you are running Pete\u2019s OpenGL, ensure you enable the offscreen rendering to view this menu properly. The ePSXe can support various memory card files, including Dexdrive and PSEmu Pro. It also has a memory card selector that enables you to choose the file you want to use and its slots.\n\n\n\nWhen playing a game on your PS, you can stop in between and save your progress on the memory card. For instance, if you are on level ten in a game, you will continue playing on this level as you save data on your memory card.\n\n\n\nThe PSX emulator\u2019s design lets you save game data to your memory card like you would save game data to your PS1 console with a physical memory card. To do this, you will first download 7-zip WinRAR.\n\n\n\nNext, select a program and download it as long as it can open and extract a RAR archive. You will then click on the program's setup file to set it up and click the Next tab, then choose a directory to install the program. Once done, click OK to finish the installation.\n\n\n\nOn your computer, create a new folder and name it PSX. Open the PSX.RAR archive and copy its contents to the PSX folder. In the PSX folder, create a folder and name it BIOS, then transfer the SCPH1001.bin file to BIOS. To launch your PSX emulator, click on File at the top of your screen and select Configuration. Next, locate the Memory cards tab and create a name for the emulated memory card.\n\n\n\nLastly, when using the ePSXe, you should note that the PSX can save up to five game saves on its emulated memory card. These save slots are also called save states, and you can change them by selecting a different one when saving your game.\n\n\n\nWhen utilizing the save states in your memory card, you should be cautious and stick to PS1 games that you legally own since piracy is illegal. Also, you should avoid downloading the SCPH1001 bin file and instead use the one from your console since such download is also unlawful.\n\n\n\nWrap Up\n\n\n\nThe ePSXe, the PS emulator for Apple and Windows, features plugins that increase its sound-producing and video rendering capabilities. These plugins are also useful in attaining the best setting for ePSXe full screen for a fantastic gaming experience. To change the window size to full screen, you will first download Pete\u2019s plugin and use WinZip to extract them, save them in the ePSXe folder, and configure the filter.\n\n\n\nWhen playing on your PS1, you do not have to worry about losing progress. With the Save States feature, you can save your exact spot in the game. If you have reached a certain level and want to take a break, you can save this progress in your memory card and continue playing later.\n\n\n\nThis saving is similar to how you would save data to your physical SD card. Thus, with ePSXe, you do not have to worry about enjoying quality gaming and saving progress, as you can achieve all this with a few mouse clicks.","headline":"ePSXe Tips (Full screen, Save state, Memory cards, Textures)","author":{"@type":"Person","name":"Bal Kang","url":""},"datePublished":"2021-11-24","mainEntityOfPage":"True","dateModified":"November 20, 2022","image":{"@type":"ImageObject","url":"https:\/\/technology.purplepedia.com\/wp-content\/uploads\/2022\/01\/how-to-change-the-window-size-to-full-screen-on-epsxe.jpg","height":248,"width":372},"publisher":{"@context":"http:\/\/schema.org\/","@type":"Organization","name":"Technology","logo":{"@type":"ImageObject","url":"https:\/\/technology.purplepedia.com\/wp-content\/uploads\/2022\/06\/logo-300x125.jpg","height":600,"width":60}}}Bal KangRecent Postslink to Dolby Vision Issues (Look Dark, Too Bright Checked Out)Dolby Vision Issues (Look Dark, Too Bright Checked Out)You turn to HDR because you want the best quality TV viewing and fantastic bright colors. If you have enabled Dolby Vision and have noticed that the shades are darker, you want to know why and how...Continue Readinglink to Dolby Vision Issues (Look Green, Purple, Yellow, Grainy)Dolby Vision Issues (Look Green, Purple, Yellow, Grainy)Anyone who values quality entertainment will tell you how important it is to have the perfect TV colors. Dolby Vision improves how the pictures look, but in an unfortunate twist, sometimes the system...Continue Readingif(typeof ez_ad_units!='undefined'){ez_ad_units.push([[300,250],'purplepedia_com-box-1','ezslot_14',200,'0','0'])};__ez_fad_position('div-gpt-ad-purplepedia_com-box-1-0');report this adAbout Uspurplepedia.com was set up to provide quality information about around popular topics and subjects, with highly informative articles. 2b1af7f3a8